Welcome to MOZ Electronicssupport@mozelectronics.com
Request a QuoteContact Us
CartGet Inquiry
D5310BRTZ-REEL7 — Analog Devices — Data Acquisition — product image
Analog Devices

Analog Devices AD5310BRTZ-REEL7 10-Bit Rail-to-Rail Voltage Output DAC

Data Acquisition · Analog Devices

MPND5310BRTZ-REEL7

10-bit buffered voltage-output DAC for portable instruments, offset adjustment, programmable sources, and compact control circuits.

Resolution
10 bit
Output type
buffered voltage output
Supply voltage
2.7 V to 5.5 V
Typical supply current
140 uA at 5 V, 115 uA at 3 V
Interface
3-wire serial, SPI/QSPI/MICROWIRE/DSP compatible
Package
6-lead SOT-23
Available to Source

No live pricing is published for this part. Tell us what you need and we will quote within one business day.

Quoting several parts? Use the full RFQ form to upload a BOM.

  • Professional sourcingVetted supply chain with documented traceability
  • Genuine partsDocumented traceability on every shipment
  • ESD-safe handlingOriginal packaging, moisture controlled
  • Worldwide shippingConsolidated freight to 100+ countries

Specifications

Reference table for D5310BRTZ-REEL7: 7 electrical and mechanical values from Analog Devices data, ready to copy into your design notes.

ParameterValueParameterValue
Resolution10 bitInterface3-wire serial, SPI/QSPI/MICROWIRE/DSP compatible
Output typebuffered voltage outputPackage6-lead SOT-23
Supply voltage2.7 V to 5.5 VPower-down current200 nA at 5 V, 50 nA at 3 V
Typical supply current140 uA at 5 V, 115 uA at 3 V

Product Overview

Application context for D5310BRTZ-REEL7 (Analog Devices · Data Acquisition) — what the part is for, how it is typically used, and the design points buyers ask about first.

10-bit buffered voltage-output DAC for portable instruments, offset adjustment, programmable sources, and compact control circuits.
AD5310BRTZ-REEL7 is a single 10-bit buffered DAC designed for low power voltage-output control from a 2.7 V to 5.5 V supply. It uses a 3-wire serial interface compatible with SPI, QSPI, MICROWIRE, and DSP interfaces, with clock rates up to 30 MHz. The internal output amplifier supports rail-to-rail output swing, while power-on reset brings the DAC output to 0 V until a valid write occurs. In a product design, this part is commonly used as a digitally programmable trim or control voltage source. The small SOT-23 package is useful when the DAC must sit close to an analog load, sensor path, bias node, or calibration point without consuming much board area.

Specifications

Resolution 10 bit
Output type buffered voltage output
Supply voltage 2.7 V to 5.5 V
Typical supply current 140 uA at 5 V, 115 uA at 3 V
Interface 3-wire serial, SPI/QSPI/MICROWIRE/DSP compatible
Package 6-lead SOT-23
Power-down current 200 nA at 5 V, 50 nA at 3 V

Key Features

  • Guaranteed monotonic DAC architecture
  • rail-to-rail output buffer
  • supply-derived reference for wide output range
  • power-on reset to zero scale
  • three software-selectable power-down functions
  • low power operation for battery equipment

Applications

  • Portable battery-powered instruments
  • digital gain and offset adjustment
  • programmable voltage and current sources
  • programmable attenuators

Summary

AD5310BRTZ-REEL7 is a practical choice when a design needs a compact, low power DAC with simple serial control and rail-to-rail output swing. It is especially useful in calibration, trim, and programmable control nodes where board area and standby current matter.

Related Parts

Other catalog parts engineers often review alongside D5310BRTZ-REEL7 (Analog Devices). Useful when you need a pin-compatible or cost-down path.

PARTAD7298BCPZ-RL7Analog DevicesView part →PARTAD5171BRJZ100-R2Texas InstrumentsView part →

Design Resources

Tutorial and application reading tied to D5310BRTZ-REEL7. These are editorial guides on this site, not manufacturer PDFs.

GUIDEIndustrial Electronic Components: Types, Applications, and Sourcing GuideRead guide →GUIDEWhat Does an Op-Amp Do? Functions, Uses, and Real Circuit ExamplesRead guide →GUIDEVoltage Regulator Module(VRM): What It Is, How It Works, and How to Choose OneRead guide →GUIDEWhat Is an Autopilot Control System? Aircraft Sensors, Actuators, and Flight Control Electronics ExplainedRead guide →GUIDEWhat Is a Parasitic Diode? Causes, Effects, and Design ConsiderationsRead guide →GUIDEUnderstanding Digital Signal Controllers (DSCs): Bridging Microcontrollers and DSPsRead guide →

Frequently Asked Questions

5 practical questions buyers ask about D5310BRTZ-REEL7 — availability, specs, and how to request a quote.

What is D5310BRTZ-REEL7?

10-bit buffered voltage-output DAC for portable instruments, offset adjustment, programmable sources, and compact control circuits.

What package is D5310BRTZ-REEL7 supplied in?

D5310BRTZ-REEL7 is supplied in 6-lead SOT-23 by Analog Devices.

What type of component is D5310BRTZ-REEL7?

D5310BRTZ-REEL7 is a Data Acquisition from Analog Devices.

What are the key specifications of D5310BRTZ-REEL7?

Resolution: 10 bit; Output type: buffered voltage output; Supply voltage: 2.7 V to 5.5 V; Typical supply current: 140 uA at 5 V, 115 uA at 3 V; Interface: 3-wire serial, SPI/QSPI/MICROWIRE/DSP compatible.

Is D5310BRTZ-REEL7 in stock at MOZ Electronics?

D5310BRTZ-REEL7 is listed as in stock. Order online when a price is shown, or submit an RFQ for volume pricing and lead time.

Sourcing desk

Need volume pricing, a specific date code, or an alternative part?

Send us the quantity and target date — a sourcing specialist replies within one business day.

Request a Quote